Renown 20” Low Speed Floor Machine with Pad Driver, Metal, Blue, 1.5 HP, 175 RPM

Renown 20” Low Speed Floor Machine with Pad Driver, Metal, Blue, 1.5 HP, 175 RPM

The Renown 20 in. floor machines is a rugged high powered machines built for years of use in a wide range of floor machine applications. With easy-to-use fingertip controls and multiple safety features, such as handle-mounted safety switch and a 50 ft. yellow cord. These all metal construction machines are designed for Heavy-Duty use.

HIGHLIGHTS

• All Metal Construction
• 20" Deck
• 19" Pad Driver
• Triple Planetary All Steel Gear Box
• Universal Clutch Plate
• Safety Lock-Out Switch
• 50' Cord
• 66-Frame Motor

SAFETY PRECAUTIONS

1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and understand the operators manual.
– In flammable or explosive areas.
– With a damaged cord or plug.
– If not in proper operating condition.
– In outdoor areas.
– In standing water.
– With the use of extension cords.

2. Before operating machine:
– Make sure all safety devices are in place and operating properly.

3. When using machine:
– Do not run machine over cord.
– Do not pull machine by cord or plug.
– Do not pull cord around sharp edges or corners.
– Do not unplug by pulling on the cord.
– Do not stretch cord.
– Do not handle plug with wet hands.
– Keep cord away from heated surfaces.
– Report machine damage or faulty operation immediately

4. Before leaving or servicing machine:
– Turn off machine.
– Unplug cord from outlet.

5. When servicing machine:
– Unplug cord from outlet.
– Use manufacturer supplied or approved replacement parts.

Storage:

1. Unplug machine from power source and wrap cord on handle.
2. Tilt machine back and remove pad driver or brush.
3. Store machine in upright position and in a dry area.